For power-press shops

Same press. Same floor. No hand in the die.

Handoff makes the power presses you already own safe, measurable and more productive.

A worker reaches into a power press, pulls back and steps away, and a loader feeds the press instead. Second strokePress blocked

Concept illustration

Why this matters

A power press comes down with tonnes of force.

On many older presses, a worn pin or spring can make it come down twice. No skill is faster than a press that fires on its own. Most of these injuries can be prevented.

Concept illustration

  • 2,514

    injured factory workers were helped by one charity in 2025. Most had crush injuries.

  • 76%

    of cases: a broken spring or pin made the press come down a second time (a double stroke).

  • 95%

    of injuries happened on presses with no safety sensor, or with the sensor removed.

  • 2

    fingers lost, on average, in each power-press injury.

Source: CRUSHED 2026, Safe in India Foundation (2025 data)(opens in a new tab)

What we do

Three steps. One press at a time.

We never replace your press. We start small, show you the numbers, and you decide what comes next.

  1. Step 1

    Watch

    A small box clips onto your press. Every evening you get a WhatsApp report: strokes, idle time, and early warnings when the brake or clutch is getting weak.

    First two weeks free

  2. Step 2

    Guard

    We fit a modern air clutch-brake and a safety light curtain, so the press cannot come down on a hand.

    Can be paid monthly

  3. Step 3

    Hand

    For the right parts, a loader can feed the press, and your worker runs it from outside the danger zone. More parts per shift.

    When you’re ready

Concept illustration

See it

One press, four steps.

Second strokePress blocked

Step 1 of 4

Today

Many presses in small shops use a pin clutch and a foot pedal. Once the pedal trips it, the press cannot stop halfway. If the pin or spring wears out, it can come down a second time on its own.

Concept illustration. Actual equipment depends on your press type and size.

What you get

Safer today. More parts tomorrow.

  • YouFewer breakdowns, proof of safety for your customer’s audit, more parts per shift.
  • Your workersA press that cannot hurt them. The job gets safer, not smaller.
  • Their familiesEveryone comes home with ten fingers.

How we work with you

Start with one press.

The first two weeks of Watch are free. After that, you pay monthly, not all at once. We install when your press is off, and we look after everything we fit.

  1. Day 1

    Book a call

    Tell us about your presses and your orders.

  2. Weeks 1–2

    Free Watch on one press

    A WhatsApp report every evening.

  3. Then

    You decide

    Keep Watch, fix the press with Guard, or stop. No pressure.

Where we are We’re starting with our first presses in Bengaluru.

Our safety promise

Safety is decided by certified safety parts, not by software.

Every safety part we fit will come from an established maker and be fitted by a certified partner. We will test every press before we hand it back.

Press blocked

Concept illustration

Questions owners ask

Short answers.

Do I need a new press?

No. We work with the press you have.

Will it slow production?

It shouldn’t. The press stops only when a hand is actually inside. We count your strokes before and after, so you can check for yourself.

Will it replace my workers?

No. Your workers stay. The press just can’t hurt them.

Which presses?

Mechanical power presses, including older pedal presses. Tell us yours on the call.

Do I have to stop production to install?

The Watch box goes on while the press is off, for example at tea break. Bigger work can be done on a Sunday.

Talk to us

Run a press shop? Start with one press.

Message us on Telegram, or book a short call. Know a press shop, or work in one? Share this page on WhatsApp.

On a supplier-quality team at a vehicle maker? We would like to show you a simple way to see and fix press safety across your suppliers.